HJC CL 15 GLOSS BLACK FULL FACE HELMET LARGE L    US $85.00

HJC CL 15 Motorcycle Helmet Flat Matte Black Large L    US $114.99

NEW HJC CL 15 CRYPT MOTORCYCLE HELMET MEDIUM    US $74.99

HJC motorcycle helmet cl 15 mutant M    US $175.00

HJC CL 15 CL15 Motorcycle Helmet Solid Black Small S    US $64.99

HJC CL 15 Motorcycle Helmet Solid Silver XLarge XL NEW    US $82.99

HJC CL 15 Pegasus Helmet Large    US $114.95

New HJC CL 15 helmet burgandy size Small Nice Cheap    US $49.00

Powered by phpBay Pro

The Crypt MC-5F HJC CL-15 helmet is a solid mid-level full-face motorcycle helmet for the street that offers an understated menacing demeanor, thanks to a factory custom painted scheme that combines a black painted base finish and light gray subdued graphics, all with a matte clear coat. The center piece of the bold graphics design that scrunches up its nose at civility is a large skull and crossbones image covering the left rear of the helmet.

Objectively, the Crypt MC-5F HJC CL-15 helmet is a well-thought-out and well-built full-face motorcycle helmet, and it earns both DOT and Snell M2005 motorcycle helmet certification.

Injection-molded one-piece polycarbonate composite outer shell construction leads the way in creating an aerodynamically designed and balanced solid full-face motorcycle helmet with the strength, structural integrity, and impact flexibility to dissipate impacts and resist penetration. It plays a obviously important part in this HJC motorcycle helmet's ability to earn both DOT and Snell M2005 motorcycle helmet safety ratings.

A molded-in recess on each side of the helmet sweeps from the front side chin bar up and back across the sidepanel. The recesses help enhance aerodynamics for better balance and reduced wind drag and lift.

Creating the Crypt's macabre factory custom exterior paint and graphics scheme begins with the outer shell getting wet-sanded smooth by hand to ensure an nice, smooth surface to paint on. Next, the sanded-smooth outer shell is coated with premium flat black paint, which is baked dry for optimal curing that ensures a tough painted base finish.

Then, the light gray, subdued factory custom motorcycle helmet graphic kit is precisely aligned and applied by hand. Special polyurethane clear coating is then used to create a protective flat-finish layer that protects the paint/graphics against scuffs, scratches and permits easy soap/water cleanups.

The one-piece HJC Helmets design for this solid full-face motorcycle helmet delivers a strong chin bar and a large eyeport opening for greater visibility. To cover that large eyeport opening, the Crypt comes with an HJC Helmets HJ-09 clear face shield that is anti-fog and scratch-resistant hard coated with an optically correct 3D design that provides an undistorted view of the road or track. The HJC Helmets shield also blocks 95 percent of harmful UV radiation.

The HJC CL-15 shield is mounted to the helmet utilizing HJC's 3rd generation easy function tool-less shield removal system with two-stage shield pivot/compression system. As the shield closes, it is pulled inward against the black rubber wrap-around eyeport gasket to provide a perfect air and water-tight seal.

This HJC full-face motorcycle helmet model utilizes a four-way anti-fog flow-through cooling and ventilation system to help keep the rider cool and to help maintain ideal visibility. On the forehead are twin air intake port, with airflow controlled by large black multi-stage slide shutters that permit easy gloved-hand operation.

Below, a dual-pivot chin vent serves to direct air to the mouth area and to feed the multiports that direct air up across the inner shield surface. Side chin bar Venturi exhaust vents draw heat and moisture out of the face shield area to prevent fogging, while twin top dorsal Venturi exhaust vents maximize flow-through airflow across the rider's pate.

To help soak up nasty high-impact energy as well as to direct air and control helmet temperature, HJC stuffs this full-face motorcycle helmet model with a two-piece channeled dual-density lightweight EPS foam inner shell impact liner. The polycarbonate outer shell and the EPS foam inner shell form a protective combo that lets the HJC CL-15 helmet model meet both DOT and Snell motorcycle helmet safety standards.

Removable comfort-contoured foam padding covered with soft, stylish black Nylex provide a head comfort liner and cheek pads for a snug yet comfortable fit plus easy cleaning and air drying. A sculptured wrap-around neck roll provides added comfort in the form of padding and reduced interior noise from wind, road, and exhaust plus helps with retention during an accident.

	HJC CL-15 Crypt Helmet - Medium/Black Sale Price: $144.99
	HJC CL-15 Helmets feature injection-molded, polycarbonate composite shell constructionTwo-piece channeled dual-density lightweight EPS linerLarge eye port opening for greater visibilityUnique CAD generated shell sculpture for exceptional fit and increased helmet stabilityFlow-Through "ACVS" Advanced Channeling Ventilation SystemTwo multi-stage forward intake vents and a large integrated rear exhaust spoiler are combined with sculptured air channels allow the entire helmet to act as a full venturi exhaust system fresh air is channeled front to back, drawing heat and humidity up and out of the shell through four internal exhaust channelsSide chin bar venturi exhaust vents for increased heat and humidity dissipation, easy to remove Nylex liner and cheek pads for cleaning and air drying, sculptured wrap-around neck roll reduces wind noisePadded chin strap design3rd Generation 2-Stage PivotCompression Shield Closure SystemHJ-09 anti-fog and scratch resistant hard-coated shield3rd generation easy function tool-less shield removal systemAdvanced, 2-stage shield pivotcompression system ensuring maximum shield sealAerodynamic flush-mounted fit for reduced turbulence noiseScratch-resistant hard coated shield with optically-correct 3D designShield radiation protection capacity rated to block 95% of harmful UV radiationSoft helmet storage bag includedDOT-218 and SNELL-M2005 approvedCloseouts are limited to stock on hand
	Features HJC CL-15 Helmets feature injection-molded, polycarbonate composite shell construction Two-piece channeled dual-density lightweight EPS liner Large eye port opening for greater visibility Unique CAD generated shell sculpture for exceptional fit and increased helmet stability Flow-Through "ACVS" Advanced Channeling Ventilation System

It also delivers plenty of all-around performance that makes it equally apropos as a street or track-day racing helmet. That it meets both DOT and Snell motorcycle helmet safety standards is a sign of high-grade materials and well-executed construction.

Simply stated, the Crypt is a mid-level full-face street motorcycle helmet for those who want extreme performance plus refreshingly understated yet menacing demeanor, all while saving a nice wad of cash.

HJC Full-Face Motorcycle Helmet: CL-15 Crypt MC-5F Helmet is a post from: Full Face Motorcycle Helmets

ICON AIRFRAME TEAM GIXXER MOTORCYCLE HELMET S SMALL    US $179.00

Icon Motorcycle Helmet Airframe Sideplates Team Gixxer    US $40.00

Icon Airframe Team Motorcycle Helmet Gixxer 2X    US $250.00

ICON HELMET AIRFRAME TEAM GIXXER 2XL    US $330.00

ICON HELMET AIRFRAME TEAM GIXXER XLarge    US $330.00

ICON HELMET AIRFRAME TEAM GIXXER Large    US $330.00

ICON HELMET AIRFRAME TEAM GIXXER Medium MD M    US $330.00

ICON HELMET AIRFRAME TEAM GIXXER Small SM S    US $330.00

Powered by phpBay Pro

If you are in the market for a blue full face motorcycle helmet, the Icon Team Gixxer Airframe helmet may be of interest. This new high-end race-spec motorcycle helmet from Icon is seriously feature-packed and comes with a unique full-body factory custom paint scheme that combines military and racing motifs, resulting in what might be called mild road-warrior styling.

Up top, integrated flow-through racing motorcycle helmet diffusers give the Icon Team Gixxer Airframe helmet a sculpted look. This blue full face motorcycle helmet from Icon is a Snell M2005 and DOT approved helmet.

Leading the way in meeting Snell M2005 and DOT motorcycle helmet safety standards is an outer shell constructed of a fiberglass/carbon fiber/dyneema composite with the outer shell and chin bar a unified one-piece design for added strength. Result is, a solid full-face motorcycle helmet that can do exactly what the manufacturer planned. The outer shell is sanded smooth before the premium dark blue painted base finish is applied.

Following that is the hand-applied factory custom motorcycle helmet graphics kit. Once that is complete, the blue full face motorcycle helmet is left with a dark gray/light gray/white camo pattern covering the sidepanels and lower rear of the helmet plus a large black number "1" on each side and a small black "1" on the back.

From front to back, over the top, a white pinstripe runs along the helmet's centerline. A small Icon logo adorns the forehead while the "Icon Moto" in large white black letters is on each side of the chin bar. Included separately are twelve small sponsor decals that can be applied to the face shield side plates for a more official look. High-gloss clear polyurethane coating protects the painted finish/graphics against scratches and permits easy soap/water cleanups.

The multiposition ratcheting Icon Helmet face shield that comes with the Gixxer Team helmet is a quick-release proshield made of clear optical-quality, injection-molded polycarbonate with an anti-fog coating on the inside for fog-free performance. Icon helment replacement face shields in an eye-catching array of colors are available for a snazzier look.

Smoke tinted Icon helment replacement face shield choices include fog-free light smoke or standard dark smoke. Solid colored mirrored choices are chameleon, dark gold, silver, blue, and green. Three additional Icon helment replacement shields for the Airframe helmet model are the Go Go gradient face shields, which include gradated black, gradated pink, and gradated blue.

To absorb nasty impact energy as well as improve comfort and fit, an anatomically contoured EPS foam inner shell rides inside this blue full face motorcycle helmet from Icon. It is the inner shell that absorbs most of the energy in a crash. In the case of the Airframe helmet mode, the protective combination of the EPS foam inner shell and the fiberglass/carbon fiber/dyneema composite outer shell lets the helmet earn Snell M2005 and DOT motorcycle helmet certification.

The inner shell is followed by comfort - contoured breathable foam padding components lined with hydradry moisture wicking liner fabric in a camo pattern. The interior padded comfort components are removable for washing. A chin curtain is included to combat turbulence and noise.

	Icon Team Gixxer Men's Airframe Street Motorcycle Helmet - Size: Medium Sale Price: $248.00
	The Icon Airframe helmet represents the pinnacle in modern helmet design. The Airframe is equipped with multiple safety and comfort features, developed through exhaustive lab research and real world testing...
	Features Size: Medium Icon Team Gixxer Airframe Street Helmet for Men 2008 Model

The helmet's anti-fog system includes a removable breath guard and side chin exhaust vents, which incorporate mesh screens to allow air out while keeping dirt out. This track-focused blue full face motorcycle helmet from Icon is available in sizes XXS-3XL for $330.00.

Blue Full Face Motorcycle Helmet: Icon Team Gixxer Airframe Helmet is a post from: Full Face Motorcycle Helmets

Unable to find matching items using automatic search.
Click the eBay logo and try a manual search.

If you are a person who always seems to have a hard time in life, you probably shouldn't ride a motorcycle, but if you do then you might be interested in the black fusion Icon Domain 2 13 helmet, a composite carbon fiber full-face motorcycle helmet.

What makes this Icon helmet so apropos for down-trodden souls is the factory custom paint scheme consisting of a matte black base fusion finish with a large red number thirteen, double outlined in black and white, on each side and "tough luck" in large white lettering across the front of the chin bar.

It is reassuring to know that the black fusion Icon Domain 2 13 helmet is an ECE 22-05/Snell/DOT approved motorcycle helmet, meeting the highest industry standards for safety. The composite outer shell of this dyneema/aramid/carbon fiber full-face motorcycle helmet provides light weight without sacrificing safety, ensuring the strength and structural integrity to earn ECE 22-05/Snell/DOT approved motorcycle helmet certification. The outer shell and chin bar are a single-piece design for added strength.

Aside from the factory custom paint scheme, the most pronounced visual statement on the Icon helmet is the elaborate diffuser/extractor appliance that forms two topside vent channels and exhaust ports plus a three dimensional rectilinear rear spoiler, giving the Domain 2 a sculpted look. Another attention-grabber is the top dorsal air foil jutting up in the air and evoking images of a Daytona Super Bird.

The elaborate diffuser/extractor atop this composite carbon fiber full-face motorcycle helmet is derived from motorcycle racing helmet ventilation technology, which is unmatched in its effectiveness for improved airflow by drawing hot stale air and moisture out. Because it was specifically designed for the extreme demands of racing, the ventilation performance may not be as effective under normal street conditions.

Air stream enters the diffuser/extractor vent channels through large ram-air intake ports. Large rear exhaust ports route hot air and moisture out of the helmet. Triple intakes on the front of the chin bar includes a unique bottom mounted chin air intake system plus right and left-side intakes.

This full-face motorcycle helmet from Icon Helmet features a large window design that provides maximum visibility. The quick-change fog-free Icon Helmet shield, designed to accept replaceable custom sideplates, closes against a wrap-around flexible black rubber lip to prevent air leaks. The multiposition ratchet mechanism is concealed by the sideplates.

The clear, optical-quality molded polycarbonate face shield has a left-side finger tab, below which is a fingertip recess molded into the chin bar, intended to help make flip-ups easier. Inside, a removable molded breath deflector reduces shield fogging in cold weather.

Additional interior appointments of the black fusion Icon Domain 2 13 helmet includes a EPS foam inner shell that has an anatomically correct shape that helps reduce impacts, improve comfort and combines with a deluxe tailored-to-fit comfort liner for ultimate fit and comfort.

Breathable black mesh nylon wraps around the top edge of the helmet interior and around the edge of the cheek padding. For comfort, the lining that can touch your skin and scalp is soft, brushed red nylon.

To help minimize noise level, this Icon composite carbon fiber full-face motorcycle helmet also comes with a removable chin curtain that seals out unwanted turbulence, road noise, and engine noise. All in all, it's not a bad carbon fiber full-face motorcycle helmet for the money ($390.00, sizes XS-XXL).

Carbon Fiber Full-Face Motorcycle Helmet: Icon Domain 2 13 Black Fusion is a post from: Full Face Motorcycle Helmets

ICON MainFrame Bombshell GoGo Blue Helmet Large L go go    US $219.99

Powered by phpBay Pro

The Pink Icon Women's Mainframe Bombshell GoGo helmet is just one piece of an ultra-girlie star-spangled riding apparel ensemble with a 1960s gogo theme that was first introduced in late 2007.

It is a high-end women's full face motorcycle helmet with a silver painted basecoat, covered with a predominately pink graphic kit to achieve a hot pink/silver factory custom paint scheme that delivers undeniable feminine style.

It has earned Europe's ECE 22/05 certification and in the U.S. is a Snell/DOT approved motorcycle helmet, a sign of quality engineering and well-executed construction. Read to to find out more about the Pink Icon Women's Mainframe Bombshell GoGo Helmet.

It is a dyneema/fiberglass-shelled Icon full face motorcycle helmet with the outer shell and chin bar a single piece design for added strength. The dyneema/fiberglass construction achieves an outer shell that is tough enough to absorb impacts and resist penetration.

And, it's able to spread and dissipate impact energy through strength, structural integrity and impact flexibility, all of which no doubt contributes to achieving ECE/Snell/DOT approved motorcycle helmet certification.

Icon helmet design also gives the outer shell stylish molded-in recessed side chin bar spoilers intended to create vacuum for hot air extraction via dual diagonal exhaust slots positioned inside the recesses.

Producing the tight girlie exterior for this women's full face motorcycle helmet starts with the sanded smooth outer shell receiving a coat of premium silver paint that provides the base. After the paint is baked and dried, the outer shell is covered with the carefully hand applied custom silver and pink motorcycle helmet graphic kit.

The graphics are die cut in such a way as to leave the silver painted finish exposed around the front top half of the chin bar, around the lower rear of the helmet and on the forehead, which is adorned with an "Icon Moto" decal sticker done in pink-outlined funky 1960s style white lettering.

On the sidepanels of this women's full face motorcycle helmet, the graphic composition includes two sweeping wave-like silver lines across the chin bar that continue around to the back of the helmet. Another silver line winds its way around the temple area, then around the shield pivot area and heads to the back of the helmet. There is also a sprinkling of silver stars, mostly emanating up and back from the shield pivot area.

In the back, there is a sexy female silhouette inside a large star shape created by the die cut of the decal sticker. Up top are painted-to-match silver twin super vent diffusers, the tops of which are covered pink stars included with the graphic kit. To keep the exterior of this factory custom painted motorcycle helmet looking good, the finish process includes clear coats for a deep scratch-resistant finish.

The twin top mounted super vent diffusers are a motorcycle racing helmet ventilation system technology, intended to deliver superior airflow inside the helmet through ram-air forehead intake ports combined with the super vent Venturi cooling system created by the large flow-through air tunnels formed by the diffuser bodies. The ram-air intake ports are adjustable to control ventilation by way of a switch between the diffusers that cleverly functions as a secondary ram-air forehead intake vent.

There is also a positive-lock front chin vent. The top diffusers maximize airflow by pulling air entering through the chin bar vent, when open, up and out of the helmet. Molded-in lower left and right side rear air scoops also helps pull air out of the helmet through the two rear exhaust vents. The side exhaust vents are controlled via an internal on/off cheek exhaust switch.

This women's full face motorcycle helmet from Icon also features a big eyeport design for maximum visibility. The large eyeport is covered by an optically correct pink/clear gradient polycarbonate, seven-position shield that offers safe, clear vision and an easy no-tool replacement system. To help make flip-ups easier, a fingertip recess is molded-in to the chin bar below the left side finger tab on the bottom of the shield.

Flexible white rubber gasket wraps around the eyeport and fits against the face shield for a tight fit, less shield noise. This full face motorcycle helmet also comes with a removable breath deflector to prevent shield fogging.

The Pink Icon Mainframe Bombshell GoGo helmet interior is ergonomically engineered for outstanding comfort and durability. It holds a dual density styrene inner shell that conforms to your head shape for a perfect fit. The gray interior is luxurious and includes a deluxe padded comfort liner and fully removable and washable extra-thick cheek pads featuring a dual-textured lining design.

Breathable gray mesh nylon wraps around the top edge of the helmet interior and around the edges of the cheek pads to enhance air flow. For comfort, the lining that can touch your skin and scalp is soft, brushed gray nylon microfiber spangled with small black stars. This seriously feature-packed women's full face motorcycle helmet is available in sizes XXS-XL for a suggested retail of $300.00.

Women’s Full-Face Motorcycle Helmet: Icon Mainframe Bombshell GoGo Pink Helmet is a post from: Full Face Motorcycle Helmets

SHOEI RF1000 RF 1000 CASTER HELMET SILVER BLACK LARGE    US $274.99

SHOEI RF1000 RF 1000 CASTER HELMET SILVER BLACK MEDIUM    US $274.99

Shoei RF 1000 Black Full Face Motorcycle Helmet XXL EC    US $225.00

Shoei RF 1000 Helmet    US $350.00

SHOEI RF1000 RF 1000 MOTORCYCLE HELMET Black    US $275.00

SHOEI RF 1000 X11 SPECTRA SHIELDS Shoei Face Sheild    US $63.89

SHOEI RF 1000    US $100.00

SHOEI RF1000 RF 1000 CASTER MOTORCYCLE HELMET BLACK LG    US $298.00

Powered by phpBay Pro

Anyone looking for a full face motorcycle helmet that delivers unique motorcycle helmet graphics plus a number of innovative features in an easy-to-wear package will want to check out the Shoei RF-1000 Joust TC-1 helmet.

This factory custom full face motorcycle helmet is an exceptionally well-designed and well-made high-end lid designed to amply serve the need of riders who demand high-performance form, function, and finish. Engineered from the inside out for riding comfort and safety, the Shoei RF-1000 Joust TC-1 helmet meets or exceeds DOT and Snell motorcycle helmet standards.

The Joust's aerodynamically designed one-piece bag-molded outer shell is made of Shoei's proprietary Advanced Integrated Matrix Plus Multi-Fibers (AIM+) shell material, a fiberglass-based technology incorporating high-performance fiber materials combined with elastic organic fibers to create an outer shell that is lightweight, rigid, and resilient.

This Shoei full face motorcycle helmet model comes with a small aero tuned rear spoiler that dramatically reduces lift to improve riding stability and significantly diminish neck fatigue. The wind tunnel developed outer shell structure delivers optimal levels of ventilation, cooling, and aerodynamic performance for riding comfort plus DOT and Snell motorcycle helmet protection.

The outer shell of this full face motorcycle helmet from Shoei is sanded smooth and painted with a high-gloss black paint. Then the water-decal graphics are hand-applied with meticulous focus for clean and proper placement. The graphics on each side of the helmet includes a wide white band that winds its way around the helmet's side. Inside the outline formed by the white band is a soft-edged red spot and two artistic designs that look somewhat like Arabic lettering; one in silver at the top of the helmet; the other in red overlayed on the red spot. The painted finish and graphics are protected by a tough clear polyurethane coating.

On the inside, this Shoei full face motorcycle helmet utilizes a channeled two-layered expanded styro foam inner shell that directs air and controls helmet temperature. It is combined with a 3D thermo-molded space-frame-style comfort head liner that lets air get to the rider's head to improve moisture and heat transfer into the airflow around the space-frame-style liner. This not only leaves the head drier and cooler at the end of a long or hot ride, it also allows the liner to dry much faster between rides. A neck-roll pad is designed to both provide more comfort and to help reduce wind noise.

The 3D head liner is removable and washable. Cheek pads are completely removable, washable, and interchangeable with optional pads of different thicknesses for a more personal, customized fit in between-side scenarios. For convenience, cheek pads are designed with an eyeglass relief. A removable, washable, replaceable chin strap cover completes Shoei's total package of interior washability. The textured fabric is not as soft, but is comfortable. Smooth molded black rubber base trim wraps around the bottom of the helmet.

The Shoei RF-1000 Joust TC-1 helmet is a quad-vented full face motorcycle helmet. It has an integral top air scoop with two front forehead openings that is designed to maximize air intake considering all riding positions. A lower front chin vent provides fresh air to the mouth area and airflow to diminish fogging. A lower rear neck exhaust vent plus top dorsal exhaust vents allows for flow-through ventilation and helps further reduce fogging by venting hot air and humidity. Adjustable ventilation shutters provide precise air control.

A clear six-position elevating ratcheting CX-1V face shield covers the large window of the Shoei RF-1000 Joust TC-1 helmet and provides protection to the rider's face and eyes. A positive lock ratchet system ensures the face shield stays put. It is made of optical-quality molded polycarbonate that is shatter-resistant, scratch-resistant, and UV-400 treated to provide complete protection against harmful UVA and UVB ultraviolet rays. It uses Shoei's QRBP quick release system and lock system that allows toolless shield swapping and holds the shield closed with the simple turn of a lever that moves one way to lock the shield and the other way to open it just a crack.

A wide variety of smoke and tinted Shoei helmet shields is available for the Shoei RF-1000 Joust TC-1 helment to serve both practical functionality in different ambient light conditions and aesthetic tastes. The tinted Spectra replacement Shoei helment shield series features a mirrored finish and is available in a choice of mirror, blue, or gold. The smoke replacement Shoei helmet shield choices for the Joust include light smoke, dark smoke, and mellow smoke for sunny conditions. For overcast conditions, there is the hi-def yellow face shield. For variable light conditions there is the hi-def amber face shield.

The Joust TC-1 Shoei RF-1000 helmet is a factory custom full face motorcycle helmet that has it all: unique motorcycle helmet graphics, wind-tunnel-developed aerodynamic outer shell structure, minimal-noise-level design, ergonomically designed full-support 3D interior head liner, optical-quality 3D curved quick-release CX-1V shield. One would expect a top-quality feature-packed full face motorcycle helmet for this price, and this DOT/Snell approved Shoei motorcycle helmet doesn't disappoint.

Shoei RF-1000 Joust TC-1 Full Face Motorcycle Helmet is a post from: Full Face Motorcycle Helmets